|
|
|
|
|
|
|
|
|
|
|
This is used to split off of an existing 1/4" line to run an additional 1/4" line. It is also used to complete a tee nozzle assembly.
Example: you are running a line around your home under your eave. When you get to a gutter downspout install the union tee to continue your eave run. This opens up a connection to run a line down the downspout and under the ground to an existing tree that will allow the mist to cover a portion of your property that wouldn't have been covered from your eaves or fences.
|
This part is necessary if you want to change your nozzle from a Hago to a cleanable 1024-3010 nozzle. One end has a male thread just like a Hago nozzle and on the other end it has a female 1024 thread to receive a male threaded slimline nozzle. All you do is use a 5/8" wrench and a 3/4" wrench to remove the existing Hago nozzle tip. Then screw in the Hago - slimline adapter. Then screw in your 1024-3010 cleanable nozzle assembly hand tight and your done. Now you can easily remove and clean your nozzles if they become clogged.
|
This receives a Hago nozzle and plugs into 1/4 union tee or elbow to complete a Hago nozzle assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
This nickel plated brass nozzle assembly pushes into a 1/4" union tee, elbow or straight. It has a viton check valve. The nozzle tip is threaded and can be taken apart and easily cleaned if clogged. Just unplug, unscrew and clean. Click on the picture for more and larger views.
|
This brass nozzle assembly will screw into an existing slimline threaded adapter and has a viton check valve. The nozzle tip can be removed and easily cleaned if clogged.
|
1024 45 degree nozzle with adapter. This nickel plated brass nozzle assy. pushes into a 1/4" union tee, elbow or straight. It has a viton check valve. The nozzle tip is threaded and can be taken apart and easily cleaned if clogged. Just unplug, unscrew and clean
|
|
|
|
|
|
|
|
|
|
|
|
|
This nickel plated brass adapter receives a Hago nozzle and plugs into 1/4 union tee or elbow to complete a Hago misting nozzle assembly. The 45 degree shape is useful to easily orient your spray direction.
|
slim line Mosquito Misting nozzle with filter with 1024-unc male threads
|
This screws in to an existing Hago nozzle adapter. This nozzle has a check valve for anti-drip and an internal filter. The nozzle is made from a high nickel content stainless steel. A viton o-ring is included for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
This misting nozzle assembly is cleanable, made of nickel plated brass has a viton check valve. Use this as the last nozzle in a run.
|
This misting nozzle assembly is cleanable, made of nickel plated brass has a viton check valve. Use this as the last nozzle in a run. Use the 45 degree configuration to easily orient your spray direction.
|
This misting nozzle assembly is cleanable, made of nickel plated brass has a viton check valve.
|
|
|
|
|
|
|
|
|
|
|
|
|
This 45 degree misting nozzle assembly is cleanable, made of nickel plated brass has a viton check valve. This nozzle configuration allows you to orient the spray easily by rotating the nozzle
|
Use this type of nozzle over hard surfaces to end a run. This nozzle requires high pressure to open with a check valve for anti-drip and an internal filter. The nozzle is made from a high nickel content stainless steel. A viton o-ring is included for easy installation.
|
Use this type of nozzle over hard surfaces to continue an existing run. This nozzle has a check valve for anti-drip and an internal filter. The nozzle is made from a high nickel content stainless steel. A viton o-ring is included for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this type of nozzle over hard surfaces to end an existing run. This nozzle has a 45 degree shape which is useful when you want to easily orient your spray direction and requires high pressure to open with a check valve for anti-drip and an internal filter. The nozzle is made from a high nickel content stainless steel. A viton o-ring is included for easy installation.
|
Use this type of nozzle over hard surfaces to continue an existing run. This nozzle has a 45 degree shape which is useful when you want to easily orient your spray direction and requires high pressure to open with a check valve for anti-drip and an internal filter. The nozzle is made from a high nickel content stainless steel. A viton o-ring is included for easy installation.
|
Mosquito Misting nozzle Filter replacements for slim line nozzles (100 pc. Pack)
|
|
|
|
|
|
|
|
|
Copper mosquito misting nozzle riser 24" tall with Tee and plug.
|
|